Upgrade Firmware
Download the file in the USB flash disk. Connect the disk to the controller with USB interface.
Click here to download the upgrade files.

1. Application: Master series: 4096, 3500, 2500, 1500´╝îMini 1000
Method:
Press [Setup] to enter the "SETUP MENU".
Press [Upgrade Manage].
Press [Upgrade Software].
Select the upgrade file.
Press [Confirm].
Press [OK] in pop up window.
Wait until the controller restart.
Notice:
1. Firmly connect the AC adapter and USB device. Don't cut off electricity before upgrade finishes.
2. External monitor connected to Master controller will auto reset and the version shows on the Monitor will change if upgrade successfully.
3. Clear all data before use.
4. Backup files of old versions are not recommended to load back again.

2. Application: Phantom series: 2048, 1024
Method:
Press [Setup] to enter the "Supervise Menu".
Press [S4] for [System Parameters].
Press [S1] for [Upgrade Firmware].
Select the upgrade file.
Press [S1] for [Confirm].
Press [Enter].
Wait until the controller restart.
Notice:
1. Firmly connect the AC adapter and USB device. Don't cut off electricity before upgrade finishes.
2. Clear all data before use.

3. Application: Party series: 600, 500, Colour series: 388, 288
Method:
Press [Setup] to enter the "Supervise Menu".
Press [S3] for [System].
Press [S3] for [Upgrade].
Select the upgrade file.
Press [S1] for [SelectFile].
Press [Enter].
Wait until the controller restart.
Notice:
1. Firmly connect the AC adapter and USB device. Don't cut off electricity before upgrade finishes.
2. Clear all data before use.